Key Features | Applications |
Excellent Repeatability | Optical Coherence Tomography |
Driver Integrated Inside, RS-232 Standard | Test Instrumentation Applications |
Parameter | Unit | Value |
Center Wavelength (λc) | nm | 1310 or 1550 or 1060 |
Operation Wavelength | nm | λc ± 50 |
Optical Delay Range | ps | 0 - 500 ps Continuous |
Zero Point Delay Offset1 | ps | ~ 440 |
Optical Delay Resolution2 | - | 0.76 μm or 2.5 fs per encoder count |
Repeatability3 | μm | 5 |
Max. Move Rate | mm/s | 8 |
Max. Insertion Loss | dB | 1.2 |
Max. Insertion Loss Variation | dB | ≤ 0.5 |
Max. Temperature Dependent Loss | dB | ≤ 0.25 |
Max. Wavelength Dependent Loss | dB | ≤ ± 0.3 |
Max. Polarization Dependent Loss | dB | 0.1 |
Min. Extinction Ratio (for PM model) | dB | 20 |
Min. Return Loss | dB | 50 |
Max. Optical Power Handling (Continuous Wave) | mW | 300 |
Electrical Interface | - | DC 5V3A |
- | USB | |
Operating Temperature | °C | 0 to + 40 |
Storage Temperature | °C | - 40 to + 60 |
Fiber Type | - | Singlemode or PM Panda fiber |
1IL is 0.5 dB higher, RL is 5 dB lower and ER is 2 dB lower for each connector added, measured at center wavelength.
2Absolute delay at 0 ps setting measured to the edge of the enclosure (excluding caps, boots, and pigtails).
3Delay resolution & repeatability based on angular resolution of stepper motor and pitch of lead-screw. Measured at 1/4-full-step (microstepping technology).
